The iFixit teardown of the 14-inch MacBook Pro with PROLED XDR, Apple’s first touchscreen Mac, is out. They gave it a 5 out of 10 for repairability, one point up from last year’s M5 MacBook Pro. It also finds what lights the new glowing Apple logo on the lid: four small LEDs.
Older MacBooks lit the logo with the backlight from the LCD screen, shining through an apple-shaped window – a cutout – in the lid. Since OLED pixels make their own light, there’s no backlight to borrow. So now there’s four LEDs sitting in a strip along one edge, and a reflective layer and a diffuser spread their light into one evenly glowing apple.
Reaching these LEDs cost iFixit the screen: the glass came apart as it pried at a warmed corner, cracking the OLED. Display repairs for these new models take a whole new lid assembly, which iFixit says is as easy to swap as last year’s. The touchscreen lid even weighs less, at 384 grams against 485 on the base 14-inch M6 model.
Touch ID now survives a logic board swap. With a donor board in, Apple’s Repair Assistant recognized the battery, display and Touch ID sensor, and touch needed no separate calibration. On the M5 model, iFixit couldn’t get Repair Assistant to finish calibrating Touch ID.
iFixit then enrolled a fingerprint and put the original board back, the way a repair shop testing with a borrowed board would. Touch ID and the touchscreen still worked.
Fans and USB-C ports still sit under the logic board. The ports have their own small boards, but each has to tilt out where the logic board sits, so a worn port or a rattling fan means pulling the board first. HDMI, the SD card reader and storage are soldered on. If it were 2027 already, that alone would cause repairability score to drop one more point down to just 4.
The cheaper MacBook Neo still has one repair the Pro doesn’t: its keyboard can be replaced on its own. The Pro’s is built into the aluminum top case, and reaching it means sacrificing a battery. To learn more about the detailed iFixit teardown of the new touchscreen MacBook Pro, check out the source link below.



